Construction Details 
• 304 Stainless steel construction in product contact areas
• Mild steel construction in non-product contact areas
• S. Howes standard flanged double ribbon agitator
Finish Details    
• Product contact surface finish, 2B (80 grit) finish
• Exterior surface finish, uniform scotch brite
• Interior welds to be continuous, no cracks or crevices, ground flush and polished to 80 grit finish
• Exterior welds to be continuous, no cracks or crevices, ground smooth & blended with scotch brite finish
• All exterior steel components to be painted with one primer coat and one top coat (food grade epoxy paint, white)
• All welding to be done as TIG welds
Standard Design Features
• Mixer tank inside dimensions of 12” wide x 20″ long
• Mixer is furnished with welded heads for leak-free operation, welds ground to 1/8” minimum radius, no crevice contamination
• Flanged journal design (with no exposed threads) for top removal of cylinder for ease of cleaning.
• Center discharge with 4” manual plug valve
• Hinged & clamped flat cover
o Lift-out safety grating
o Magnetic limit switch mounted to safety grating, 120 VAC, not wired
o Food grade white neoprene strip gasket
Standard Components    
• Drive Class I application, complete with shaft mounted direct drive gearmotor for a mixer speed of 92 RPM at 60 Hz
o 1 HP, TEFC, 1800 RPM, 3/60/230-460 TEFC inverter duty motor
• Spherical roller pillow block bearings for shaft support
• OSHA compliant bearing and shaft guards
Optional Components Included  
• Rotating mechanical shaft seals
o Seals mounted to end plate and sealed with RTV
o The seal require 3 – 5 psig compressed air purge.
• Two triple blade chopper style intenifiers
o Replaceable, interchangeable blades
o 1/2 HP, TEFC, 1800 RPM, 3/60/230-460 TEFC standard duty motor
• Portable carbon steel support stand