Construction Details

  • Nominal Capacity: 1 ton per hour
  • Construction Details
  • 304 Stainless steel construction in product contact areas
  • Fully welded tank
  • 7 Gauge tank thickness
  • 10 Gauge cover thickness
  • Solid bar shafting Finish Details
  • All exterior surfaces to be ground to 36 grit finish
  • All interior surfaces to be 2B (100-120 grit) finish
  • Product contact welds are continuous and ground to finish
  • Non-product contact welds are intermittent and gaps filled with food grade Devcon
  • All steel components to be painted with one primer coat and one top coat (white) Standard Design

 

Features

  • Solid twin shaft paddle type agitators – one shaft right hand and one shaft left hand
  • One shaft extended for drive
  • 46 Fully adjustable and replaceable solid paddles with machined washers to lock paddles to shafts
  • Three (3) 2-bolt flange bearings
  • Double lip type shaft seals
  • One (1) hinged & clamped domed cover with viewports and spray nozzle ports
  • One (1) hinged cover with flanged inlet
  • Closed cell neoprene gaskets
  • Standard flanged bottom outlet discharge
  • Counter-rotating gear connecting drive, oil bath lubrication with oil tight enclosed guard Standard Components
  • 3 HP, 1800 RPM, 3/60/230-460 hollow bore gearmotor
  • Drive Class I application, complete with shaft mounted gear reducer for a shaft speed of 175 RPM
  • Bolted inlet & discharge transitions
  • Some units equipped with flat covers.